Altiumcustomize

Design Rule Verification Report

Date : 24-06-2010
Time : 09:44:44
Elapsed Time : 00:00:00
Filename : C:\UA\SALbot\pcb_drawing\SALbot\SAL.PcbDoc
Warnings : 0
Rule Violations : 6

Summary

Warnings Count
Total 0

Rule Violations Count
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 0
Clearance Constraint (Gap=0.25mm) (All),(All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All) 0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All) 0
Hole Size Constraint (Min=0.0254mm) (Max=2.54mm) (All) 6
Width Constraint (Min=0.254mm) (Max=0.254mm) (Preferred=0.254mm) (All) 0
Width Constraint (Min=0.254mm) (Max=1mm) (Preferred=1mm) (InNet('VDD')) 0
Width Constraint (Min=0.254mm) (Max=1mm) (Preferred=1mm) (InNet('VSS')) 0
Room SAL (Bounding Region = (99.00001mm, 78.99999mm, 160.99998mm, 156.99999mm) (InComponentClass('SAL')) 0
Total 6

Hole Size Constraint (Min=0.0254mm) (Max=2.54mm) (All)
Hole Size Constraint: Pad Free-0(6.99999mm,68.20001mm) Multi-Layer
Hole Size Constraint: Pad Free-3(55mm,20.20001mm) Multi-Layer
Hole Size Constraint: Pad Free-2(6.99999mm,20.20001mm) Multi-Layer
Hole Size Constraint: Pad Free-1(55mm,68.20001mm) Multi-Layer
Hole Size Constraint: Pad J7-11(3.10002mm,6.50001mm) Multi-Layer
Hole Size Constraint: Pad J7-10(28.10003mm,6.50001mm) Multi-Layer
Back to top