Readme File for Code Example:
                      LCD with PMP 
             ----------------------------------------

This file contains the following sections:
1. Code Example Description
2. Folder Contents
3. Suggested Development Resources
4. Reconfiguring the project for a different PIC24F device
5. Revision History


1. Code Example Description:
----------------------------
This code example describes how to use PMP on PIC24F. 
Here I display something on the parallel LCD via PMP. 
And an LED will be twinkled when the LCD is refreshed. 

void LCDProcessEvents();
To display the banner array one by one.  

unsigned char LCDbusy();
Return a char whether the LCD is busy or not.

void LCDclear();
Clear LCD.

void LCDwrite(unsigned char inputType, unsigned char inputByte);
Write an instruction or a character to LCD. 

void LCDwriteLine(unsigned char lineNum, unsigned char * inputDisplay);
Display two full lines to LCD.


2. Folder Contents:
-------------------
This folder contains the following sub-folders:
a. C:\Program Files\Microchip\MPLAB C30\support\gld
        This folder will have the device GLD file, it is used for building the project. 
	This file was provided with the MPLAB?C30 toolsuite.

b. C:\Program Files\Microchip\MPLAB C30\support\h
        This folder contains C header files useful in building this
        project. Device register and bit definitions are provided in
        the *.h file that follows the device name. These files were provided
        with the MPLAB?C30 toolsuite.

c. C:\Program Files\Microchip\MPLAB C30\lib
        This folder contains library archive files, which are a
        collection of precompiled object files. The file
        named "libpic30-coff.a" contains the C run-time start-up
        library. These file were provided with the
        MPLAB?C30 toolsuite.

d. hex
        This folder contains three file types - coff, hex and map.
        These are files generated by the MPLAB?C30 toolsuite on build
        operation performed within MPLAB?IDE. The *.map file contains
        details on memory allocation for various variables, constants
        and dsPIC instructions specified in the source and library
        code. The *.hex file contains a binary file that may be
        programmed into the dsPIC device. The *.coff file contains
        a binary file that is used by MPLAB?IDE for simulation.

e. h
        This folder contains include files for the code example.


f. src
        This folder contains all the C and Assembler source files (*.c,
        *.s) used in demonstrating the described example. This folder
        also contains a sub-folder named "obj" that stores compiled
        object files generated when the project is built.


3. Suggested Development Resources:
-----------------------------------
        a. Explorer 16 Demo board with  PIC24FJ128GA010 controller

4. Reconfiguring the project for a different PIC24F device:
-------------------------------------------------------------
The Project/Workspace can be easily reconfigured for any PIC24F device.
Please use the following general guidelines:
        a. Change device selection within MPLAB?IDE to a PIC24F device of
        your choice by using the following menu option:
        MPLAB IDE>>Configure>>Select Device

        b. Provide the correct device linker script and header file for your
        device. Device linker scripts and header files are available in your
        MPLAB?C30 installation folder under:
        Device Linker Script-
                YourDrive:>Program Files\Microchip\MPLAB C30\support\gld
        Device C Header file-
                YourDrive:>Program Files\Microchip\MPLAB C30\support\h
        Device ASM Include file-
                YourDrive:>Program Files\Microchip\MPLAB C30\support\inc

        c. Provide the appropriate path to your MPLAB C30 support file locations
        using the menu option:
        MPLAB IDE>>Project>>Build Options>>Project

        d. Chose the development board applicable to your device. Some options
        are provided below:


        e. Re-build the MPLAB?project using the menu option:
        MPLAB IDE>>Project>>Build All

        f. Download the hex file into the device and run.

5. Revision History :
---------------------
        04/01/2008 - Initial Release of the Code Example