\begin{thebibliography}{10}

\bibitem{shaw84}
M.~C. Shaw,
\newblock {\em {Metal Cutting Principles}},
\newblock Oxford Series on Advanced Manufacturing, Oxford University Press,
  1984.

\bibitem{reuben98}
R.~Reuben,
\newblock {The Role of Acoustic Emission in Industrial Condition Monitoring},
\newblock International Journal of COMADEM {\bf 1}(4), 35--46 (October 1998).

\bibitem{inasaki81}
I.~Inasaki and S.~Yonetsu,
\newblock {In-Process Detection of Cutting Tool Damage by Acoustic Emission
  Measurement},
\newblock in {\em Proceedings of the 22nd International Machine Tool Design and
  Research Conference}, pages 261--268, Manchester, 1981.

\bibitem{lan82}
M.~S. Lan and D.~A. Dornfeld,
\newblock {Experimental Studies of Tool Wear via Acoustic Emission Analysis},
\newblock in {\em Proceedings of the 10th North American Manufacturing Research
  Conference}, pages 305--311, May 1982.

\bibitem{messaritis86}
V.~Messaritis and W.~K.~D. Borthwick,
\newblock {Processing Acoustic Emission Signal Data for Characterising Cutting
  Tool Wear and Chip Management},
\newblock in {\em Proceeding of the 1st International Conference on
  Computer-Aided Production Engineering}, pages 261--268, 1986.

\bibitem{naerheim88}
Y.~Naerheim and M.~S. Lan,
\newblock {Acoustic Emission Reveals Information about the Metal Cutting
  Process and Tool Wear},
\newblock in {\em Proceedings of the 16th North American Manufacturing Research
  Conference}, pages 240--244, May 1988.

\bibitem{blum90}
T.~Blum and I.~Inasaki,
\newblock {A Study on Acoustic Emission from the Orthogonal Cutting Process},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  112}(3), 203--211 (August 1990).

\bibitem{dimla00}
D.~E. Dimla, Snr.,
\newblock {Sensor Signals for Tool-Wear Monitoring in Metal Cutting
  Operations---A Review of Methods},
\newblock International Journal of Machine Tools and Manufacture {\bf 40},
  1073--1098 (2000).

\bibitem{li02}
X.~Li,
\newblock {A brief Review: Acoustic Emission Method for Tool Wear Monitoring
  during Turning},
\newblock International Journal of Machine Tools and Manufacture {\bf 42},
  157--165 (2002).

\bibitem{moriwaki80}
T.~Moriwaki,
\newblock {Detection of Cutting Tool Fracture by Acoustic Emission
  Measurement},
\newblock Annals of the CIRP {\bf 29}(1), 35--40 (1980).

\bibitem{lan84}
M.~S. Lan and D.~A. Dornfeld,
\newblock {In-Process Tool Fracture Detection},
\newblock Journal of Engineering Materials and Technology---Transactions of the
  ASME {\bf 106}(2), 111--118 (April 1984).

\bibitem{diei87}
E.~N. Diei and D.~A. Dornfeld,
\newblock {A Model of Tool Fracture Generated Acoustic Emission during
  Machining},
\newblock Journal of Engineering for Industry---Transactions of ASME {\bf
  109}(3), 227--233 (August 1987).

\bibitem{haili03}
W.~Haili, S.~Hua, C.~Ming, and H.~Dejin,
\newblock {On-Line Tool Breakage Monitoring in Turning},
\newblock Journal of materials Processing Technology {\bf 139}, 237--242
  (2003).

\bibitem{dornfeld83}
D.~A. Dornfeld and M.~S. Lan,
\newblock {Chip Form Detection using Acoustic Emission},
\newblock in {\em Proceedings of the 11th North American Manufacturing Research
  Conference}, pages 386--389, Madison, May 1983.

\bibitem{uehara84}
K.~Uehara and Y.~Kanda,
\newblock {Indentification of Chip Formation Mechanism through Acoustic
  Emission Measurements},
\newblock Annals of the CIRP {\bf 33}(1), 71--74 (1984).

\bibitem{dornfeld85}
D.~A. Dornfeld and C.~S. Pan,
\newblock {A Study of Continuous/Discontinuous Chip Formation using Acoustic
  Emission},
\newblock Journal of Applied Metal Working {\bf 4}(1), 18--29 (July 1985).

\bibitem{iturrospe05}
A.~Iturrospe, D.~A. Dornfeld, V.~Atxa, and J.~M. Abete,
\newblock {Bicepstrum Based Blind Identification of the Acoustic Emission (AE)
  Signal in Precisison Turning},
\newblock Mechanical Systems and Signal Processing {\bf 19}, 447--466 (2005).

\bibitem{oxley89}
P.~L.~B. Oxley,
\newblock {\em {Mechanics of Machining: An Analytical Approach to Assessing
  Machinability}},
\newblock Ellis Horwood Series in Mechanical Engineering, Ellis Horwood, 1989.

\bibitem{rangwala91b}
S.~Rangwala and D.~A. Dornfeld,
\newblock {A Study of Acoustic Emission Generated during Orthogonal Metal
  Cutting---2: Spectral Analysis},
\newblock International Journal of Mechanical Sciences {\bf 33}(6), 489--499
  (1991).

\bibitem{holman02}
J.~P. Holman,
\newblock {\em {Heat Transfer}},
\newblock {McGraw}-Hill Series in Mechanical Engineering, McGraw-Hill, 9th
  edition, 2002.

\bibitem{hull84}
D.~Hull and D.~J. Bacon,
\newblock {\em {Introduction to Dislocations}}, volume~37 of {\em International
  Series on Materials Science and Technology},
\newblock Pergamon Press, 3rd edition, 1984.

\bibitem{honeycombe84}
R.~W.~K. Honeycombe,
\newblock {\em {The Plastic Deformation of Metals}},
\newblock Edward Arnold, 2nd edition, 1984.

\bibitem{skalskyi03}
V.~R. Skak's'kyi, O.~E. Andreikiv, and O.~M. Serhienko,
\newblock {Investigation of the Plastic Deformation of materials by the
  Acoustic Emission Method (Review)},
\newblock Materials Science {\bf 39}(1), 86--107 (January 2003).

\bibitem{ono05}
K.~Onu,
\newblock {Current Understanding of Mechanisms of Acoustic Emission},
\newblock The Journal of Strain Analysis for Engineering Design {\bf 40}(1),
  1--15 (January 2005).

\bibitem{kumar68}
A.~Kumar, F.~E. Hauser, and J.~E. Dorn,
\newblock {Viscous Drag on Dislocations in Aluminium at High Strain rates},
\newblock Acta Metallurgica {\bf 16}, 1189--1197 (1968).

\bibitem{kumar69}
A.~Kumar,
\newblock {Strain Rate Effects in Materials},
\newblock Applied Polymer Symposia {\bf 12}, 67--96 (1969).

\bibitem{asm54}
{ASM Committee on Machining},
\newblock {Machining of Steel and Cast Iron},
\newblock Metal Progress, 141--151 (July 1954).

\bibitem{kececioglu58}
D.~Kececioglu,
\newblock {Shear-Strain Rate in Metal Cutting and its Effects on Shear-Flow
  Stress},
\newblock Transactions of the ASME {\bf 80}, 158--168 (January 1958).

\bibitem{ernst41}
H.~Ernst and M.~E. Merchant,
\newblock {Chip Formation, Friction and High Quality Machined Surfaces},
\newblock Transactions of the American Society for Metals {\bf 29}, 299--378
  (1941).

\bibitem{oxley63}
P.~L.~B. Oxley and M.~J.~M. Welsh,
\newblock {Calculating the Shear Angle in Orthogonal Metal Cutting from
  Fundamental Stress, Strain, Strain-Rate Properties of the Work Material},
\newblock in {\em {Proceedings of the 4th International Machine Tool Design and
  Research Conference}}, pages 73--86, 1963.

\bibitem{wright77}
P.~K. Wright and J.~L. Robinson,
\newblock {Material Behaviour in Deformation Zones of Machining Operation},
\newblock Metals Technology {\bf 4}(5), 240--248 (May 1977).

\bibitem{stevenson70}
M.~G. Stevenson and P.~L.~B. Oxley,
\newblock {An Experimental Investigation of the Influence of Strain-Rate and
  Temperature on the Flow Stress Properties of a Low Carbon Steel using a
  Machining Test},
\newblock Proceedings of the Institution of Mechanical Engineers {\bf 185},
  741--754 (1970--1971).

\bibitem{hastings74}
W.~F. Hastings, P.~L.~B. Oxley, and M.~G. Stevenson,
\newblock {Predicting a Materials's Machining Characteristics Using Flow Stress
  Properties Obtained from High-Speed Compression Tests},
\newblock Proceedings of the Institution of Mechanical Engineers {\bf 188},
  245--252 (1974).

\bibitem{zorev63}
N.~N. Zorev,
\newblock {Interrelationship between Shear Process Ocurring along Tool Face and
  on Shear Plane in Metal Cutting},
\newblock in {\em International Research in Production Engineering}, pages
  42--49, 1963.

\bibitem{trent84}
E.~M. Trent,
\newblock {\em {Metal Cutting}},
\newblock Butterworths, 2nd edition, 1984.

\bibitem{kobayashi60}
S.~Kobayashi and E.~G. Thomsen,
\newblock {The role of Friction in Metal Cutting},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  82}, 324--332 (November 1960).

\bibitem{fenton68}
R.~G. Fenton and P.~L.~B. Oxley,
\newblock {Mechanics of Orthogonal Machining: Allowing for the Effects of
  Strain Rate and Temperature on Tool-Chip Friction},
\newblock Procedings of the Institution of Mechanical Engineers {\bf 183},
  417--438 (1968-1969).

\bibitem{xiaoping97}
L.~I. Xiaoping,
\newblock {Development of a Predictive model for Stress Distributions at the
  Tool-Chip Interface in Machining},
\newblock Journal of Materials Processing Technology {\bf 63}, 169--174 (1997).

\bibitem{buryta98}
D.~E. Buryta and R.~Sowerby,
\newblock {Experimental Determination of Rake face Stress Distributions},
\newblock Key Engineering Materials {\bf 138--140}, 57--125 (1998).

\bibitem{hosford83}
W.~F. Hosford and R.~M. Caddell,
\newblock {\em {Metal Forming: Mechanics and Metallurgy}},
\newblock Prentice-Hall, 1983.

\bibitem{bickel63}
E.~Bickel,
\newblock {The Temperature on a Turning Tool},
\newblock in {\em International Research in Production Engineering}, pages
  89--94, 1963.

\bibitem{silva99}
M.~B. Silva and J.~Wallbank,
\newblock {Cutting Temperature: Prediction and Measurement Methods---A Review},
\newblock Journal of Materials Processing Technology {\bf 88}, 195--202 (1999).

\bibitem{stephenson93}
D.~A. Stephenson,
\newblock {Tool-Work Thermocouple Temperature Measurements---Theory and
  Implementation Issues},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  115}(4), 432--437 (November 1993).

\bibitem{chow88}
J.~G. Chow and P.~K. Wright,
\newblock {On-Line Estimation of Tool/Chip Interface Temperatures for a Turning
  Operation},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  110}(1), 56--64 (February 1988).

\bibitem{chao61}
B.~T. Chao, H.~L. Li, and K.~L. Trigger,
\newblock {An Experimental Investigation of Temperature Distribution at
  Tool-Flank Surface},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  83}, 496--504 (November 1961).

\bibitem{jaspers98}
S.~P. F.~C. Jaspers, J.~H. Dautzemberg, and D.~A. Taminiau,
\newblock {Temperature Measurement in Orthogonal Metal Cutting},
\newblock International Journal of Advanced Manufacturing Technology {\bf 14},
  7--12 (1998).

\bibitem{stephenson91}
D.~A. Stephenson,
\newblock {Assessment of Steady-State Metal Cutting Temperature Models Based on
  Simultaneous Infrared and Thermocouple Data},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  113}(2), 121--128 (May 1991).

\bibitem{lee51}
E.~H. Lee and B.~W. Shaffer,
\newblock {The Theory of Plasticity Applied to a Problem of Machining},
\newblock Journal of Applied Mechanics {\bf 18}, 405--413 (December 1951).

\bibitem{kobayashi59}
S.~Kobayashi and E.~G. Thomsen,
\newblock {Some Observations on the Shearing Process in Metal Cutting},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  81}, 251--262 (August 1959).

\bibitem{oxley98}
P.~L.~B. Oxley,
\newblock {Development and Application of a Predictive Machining Theory},
\newblock Machining Science and Technology {\bf 2}, 165--189 (1998).

\bibitem{hastings80}
W.~F. Hastings, P.~Mathew, and P.~L.~B. Oxley,
\newblock {A Machining Theory for Predicting Chip Geometry, Cutting Forces etc.
  from Work Material Properties and Cutting Conditions},
\newblock Proceedings of the Royal Society of London {\bf A371}(1747), 569--587
  (August 1980).

\bibitem{trent59}
E.~M. Trent,
\newblock {Tool Wear and Machinability},
\newblock Institution of Production Engineers Journal {\bf 38}(105), 105--130
  (1959).

\bibitem{spanner74}
J.~C. Spanner,
\newblock {\em {Acoustic Emission: Techniques and Applications}},
\newblock Intex Publishing Company, 1974.

\bibitem{ivanov84}
V.~Ivanov,
\newblock {Acoustic Emission: Some Problems, Tasks and Solutions},
\newblock NDT International {\bf 17}(6), 323--328 (December 1984).

\bibitem{gillis72}
P.~P. Gillis,
\newblock {Dislocation Motions and Acoustic Emissions},
\newblock Acoustic Emission, ASTM STP 505, 20--29 (1972).

\bibitem{rouby77}
D.~Rouby, P.~Fleischmann, and P.~Gobin,
\newblock {An Acoustic Emission Source Model Based on Dislocation Movement},
\newblock in {\em Proceedings of the 6th International Conference on Internal
  Friction and Ultrasonic Attenuation in Solids}, pages 811--815, 1977.

\bibitem{rangwala91a}
S.~Rangwala and D.~A. Dornfeld,
\newblock {A Study of Acoustic Emission Generated during Orthogonal Metal
  Cutting---1: Energy Analysis},
\newblock International Journal of Mechanical Sciences {\bf 33}(6), 471--487
  (1991).

\bibitem{blitz71}
J.~Blitz,
\newblock {\em {Ultrasonics: Methods and Applications}},
\newblock Butterworths, 1971.

\bibitem{diniz92}
A.~E. Diniz, J.~J. Liu, and D.~A. Dornfeld,
\newblock {Correlation Tool Life, Tool Wear and Surface Roughness by Monitoring
  Acoustic Emission in Finish Turning},
\newblock Wear {\bf 152}, 395--407 (1992).

\bibitem{kannatey-asibu81}
E.~Kannatey-Asibu, Jr. and D.~A. Dornfeld,
\newblock {Quantitative Relationships for Acoustic Emission from Orthogonal
  Metal Cutting},
\newblock Journal of Engineering for Industry---Transactions of the ASME {\bf
  103}(3), 330--340 (August 1981).

\bibitem{moriwaki83}
T.~Moriwaki,
\newblock {Application of Acoustic Emission Measurement to Sensing of Wear and
  Breakage of Cutting Tool},
\newblock Bulletin of the Japan Society of Precision Engineering {\bf 17},
  154--160 (September 1983).

\bibitem{dornfeld80}
D.~A. Dornfeld and E.~Kannatey-Asibu, Jr.,
\newblock {Acoustic Emission during Orthogonal Metal Cutting},
\newblock International Journal of Mechanical Science {\bf 22}(5), 285--296
  (1980).

\bibitem{schmenk84}
M.~J. Schmenk,
\newblock {Acoustic Emission and the Mechanics of Metalcutting},
\newblock in {\em Acoustic Emission Monitoring and Analysis in
  Manufacturing---Winter Annual Meeting of the {ASME}}, pages 95--106, December
  1984.

\bibitem{lan86}
M.~S. Lan and D.~A. Dornfeld,
\newblock {Acoustic Emission and Machining---Process Analysis and Control},
\newblock Advanced Manufacturing Processes {\bf 1}(1), 1--21 (1986).

\bibitem{saini96}
D.~P. Saini and Y.~J. Park,
\newblock {A Quantitative Model of Acoustic Emission in Orthogonal Cutting
  Operations},
\newblock Journal of Materials Processing Technology {\bf 58}, 343--350 (1996).

\bibitem{lan85}
M.~S. Lan and Y.~Naerheim,
\newblock {Application of Acoustic Emission Monitoring in Machining},
\newblock in {\em Proceedings of the 13th North American Manufacturing Research
  Conference}, pages 310--313, May 1985.

\bibitem{grabec77}
I.~Grabec and P.~Leskovar,
\newblock {Acoustic Emission of a Cutting Process},
\newblock Ultrasonics {\bf 15}(1), 17--20 (January 1977).

\bibitem{yaohui88}
Z.~Yaohui and X.~Rongbao,
\newblock {A Study on the Separation of Acoustic Emission Signals in Metal
  Cutting Process},
\newblock in {\em Progress in Acoustic Emission {IV}---The Japanese Society for
  {NDI}}, pages 462--469, 1988.

\bibitem{lin82}
G.~C.~I. Lin, P.~Mathew, P.~L.~B. Oxley, and A.~R. Watson,
\newblock {Predicting Cutting Forces for Oblique Machining Conditions},
\newblock Proceedings of the Institute of Mechanical Engineers {\bf 196},
  141--148 (1982).

\bibitem{adibi-sedeh03}
A.~H. Adibi-Sedeh, V.~Madhavan, and B.~Bahr,
\newblock {Extension of Oxley's Analysis of Machining to Use Different Material
  Models},
\newblock Journal of Manufacturing Science and Engineering---Transactions of
  the ASME {\bf 125}(4), 656--666 (November 2003).

\bibitem{oyane67}
M.~Oyane, F.~Takashima, K.~Osakada, and H.~Tanaka,
\newblock {The Behaviour some Steels under Dynamic Compression},
\newblock 10th Japan Congress on Testing Materials, 72--76 (1967).

\bibitem{macgregor46}
C.~W. MacGregor and J.~C. Fisher,
\newblock {A Velocity-Modified Temperature for the Plastic Flow of Metals},
\newblock Journal of Applied Mechanics {\bf 13}, A11--A16 (March 1946).

\end{thebibliography}
