GScanner

typedef struct {
  /* unused fields */
  gpointer		user_data;
  guint			max_parse_errors;
  
  /* g_scanner_error() increments this field */
  guint			parse_errors;
  
  /* name of input stream, featured by the default message handler */
  const gchar		*input_name;
  
  /* quarked data */
  GData			*qdata;
  
  /* link into the scanner configuration */
  GScannerConfig	*config;
  
  /* fields filled in after g_scanner_get_next_token() */
  GTokenType		token;
  GTokenValue		value;
  guint			line;
  guint			position;
  
  /* fields filled in after g_scanner_peek_next_token() */
  GTokenType		next_token;
  GTokenValue		next_value;
  guint			next_line;
  guint			next_position;
  
  /* to be considered private */
  GHashTable		*symbol_table;
  gint			input_fd;
  const gchar		*text;
  const gchar		*text_end;
  gchar			*buffer;
  guint			scope_id;
  
  /* handler function for _warn and _error */
  GScannerMsgFunc	msg_handler;
} GScanner;

The data structure representing a lexical scanner.

You should set input_name after creating the scanner, since it is used by the default message handler when displaying warnings and errors. If you are scanning a file, the file name would be a good choice.

The user_data and max_parse_errors fields are not used. If you need to associate extra data with the scanner you can place them here.

If you want to use your own message handler you can set the msg_handler field. The type of the message handler function is declared by GScannerMsgFunc.

g_scanner_new ()

GScanner*           g_scanner_new                       (const GScannerConfig *config_templ);

Creates a new GScanner. The config_templ structure specifies the initial settings of the scanner, which are copied into the GScanner config field. If you pass NULL then the default settings are used.

GScannerConfig

typedef struct {
  /* Character sets
   */
  gchar		*cset_skip_characters;		/* default: " \t\n" */
  gchar		*cset_identifier_first;
  gchar		*cset_identifier_nth;
  gchar		*cpair_comment_single;		/* default: "#\n" */
  
  /* Should symbol lookup work case sensitive?
   */
  guint		case_sensitive : 1;
  
  /* Boolean values to be adjusted "on the fly"
   * to configure scanning behaviour.
   */
  guint		skip_comment_multi : 1;		/* C like comment */
  guint		skip_comment_single : 1;	/* single line comment */
  guint		scan_comment_multi : 1;		/* scan multi line comments? */
  guint		scan_identifier : 1;
  guint		scan_identifier_1char : 1;
  guint		scan_identifier_NULL : 1;
  guint		scan_symbols : 1;
  guint		scan_binary : 1;
  guint		scan_octal : 1;
  guint		scan_float : 1;
  guint		scan_hex : 1;			/* `0x0ff0' */
  guint		scan_hex_dollar : 1;		/* `$0ff0' */
  guint		scan_string_sq : 1;		/* string: 'anything' */
  guint		scan_string_dq : 1;		/* string: "\\-escapes!\n" */
  guint		numbers_2_int : 1;		/* bin, octal, hex => int */
  guint		int_2_float : 1;		/* int => G_TOKEN_FLOAT? */
  guint		identifier_2_string : 1;
  guint		char_2_token : 1;		/* return G_TOKEN_CHAR? */
  guint		symbol_2_token : 1;
  guint		scope_0_fallback : 1;		/* try scope 0 on lookups? */
  guint		store_int64 : 1; 		/* use value.v_int64 rather than v_int */
  guint		padding_dummy;
} GScannerConfig;

Specifies the GScanner settings.

cset_skip_characters specifies which characters should be skipped by the scanner (the default is the whitespace characters: space, tab, carriage-return and line-feed).

cset_identifier_first specifies the characters which can start identifiers (the default is G_CSET_a_2_z, "_", and G_CSET_A_2_Z).

cset_identifier_nth specifies the characters which can be used in identifiers, after the first character (the default is G_CSET_a_2_z, "_0123456789", G_CSET_A_2_Z, G_CSET_LATINS, G_CSET_LATINC).

cpair_comment_single specifies the characters at the start and end of single-line comments. The default is "#\n" which means that single-line comments start with a '#' and continue until a '\n' (end of line).

case_sensitive specifies if symbols are case sensitive (the default is FALSE).

skip_comment_multi specifies if multi-line comments are skipped and not returned as tokens (the default is TRUE).

skip_comment_single specifies if single-line comments are skipped and not returned as tokens (the default is TRUE).

scan_comment_multi specifies if multi-line comments are recognized (the default is TRUE).

scan_identifier specifies if identifiers are recognized (the default is TRUE).

scan_identifier_1char specifies if single-character identifiers are recognized (the default is FALSE).

scan_identifier_NULL specifies if NULL is reported as G_TOKEN_IDENTIFIER_NULL. (the default is FALSE).

scan_symbols specifies if symbols are recognized (the default is TRUE).

scan_binary specifies if binary numbers are recognized (the default is FALSE).

scan_octal specifies if octal numbers are recognized (the default is TRUE).

scan_float specifies if floating point numbers are recognized (the default is TRUE).

scan_hex specifies if hexadecimal numbers are recognized (the default is TRUE).

scan_hex_dollar specifies if '$' is recognized as a prefix for hexadecimal numbers (the default is FALSE).

scan_string_sq specifies if strings can be enclosed in single quotes (the default is TRUE).

scan_string_dq specifies if strings can be enclosed in double quotes (the default is TRUE).

numbers_2_int specifies if binary, octal and hexadecimal numbers are reported as G_TOKEN_INT (the default is TRUE).

int_2_float specifies if all numbers are reported as G_TOKEN_FLOAT (the default is FALSE).

identifier_2_string specifies if identifiers are reported as strings (the default is FALSE).

char_2_token specifies if characters are reported by setting token = ch or as G_TOKEN_CHAR (the default is TRUE).

symbol_2_token specifies if symbols are reported by setting token = v_symbol or as G_TOKEN_SYMBOL (the default is FALSE).

scope_0_fallback specifies if a symbol is searched for in the default scope in addition to the current scope (the default is FALSE).

g_scanner_input_file ()

void                g_scanner_input_file                (GScanner *scanner,
                                                         gint input_fd);

Prepares to scan a file.

g_scanner_sync_file_offset ()

void                g_scanner_sync_file_offset          (GScanner *scanner);

Rewinds the filedescriptor to the current buffer position and blows the file read ahead buffer. This is useful for third party uses of the scanners filedescriptor, which hooks onto the current scanning position.

g_scanner_input_text ()

void                g_scanner_input_text                (GScanner *scanner,
                                                         const gchar *text,
                                                         guint text_len);

Prepares to scan a text buffer.

g_scanner_peek_next_token ()

GTokenType          g_scanner_peek_next_token           (GScanner *scanner);

Gets the next token, without removing it from the input stream. The token data is placed in the next_token, next_value, next_line, and next_position fields of the GScanner structure.

Note that, while the token is not removed from the input stream (i.e. the next call to g_scanner_get_next_token() will return the same token), it will not be reevaluated. This can lead to surprising results when changing scope after peeking for the next token. Getting the next token after switching the scope will return whatever was peeked before, regardless of any symbols that may have been added or removed in the new scope.

g_scanner_get_next_token ()

GTokenType          g_scanner_get_next_token            (GScanner *scanner);

Gets the next token, removing it from the input stream. The token data is placed in the token, value, line, and position fields of the GScanner structure.

g_scanner_cur_line ()

guint               g_scanner_cur_line                  (GScanner *scanner);

Gets the current line in the input stream (counting from 1).

g_scanner_cur_position ()

guint               g_scanner_cur_position              (GScanner *scanner);

Gets the current position in the current line (counting from 0).

g_scanner_cur_token ()

GTokenType          g_scanner_cur_token                 (GScanner *scanner);

Gets the current token type. This is simply the token field in the GScanner structure.

g_scanner_cur_value ()

GTokenValue         g_scanner_cur_value                 (GScanner *scanner);

Gets the current token value. This is simply the value field in the GScanner structure.

g_scanner_eof ()

gboolean            g_scanner_eof                       (GScanner *scanner);

Returns TRUE if the scanner has reached the end of the file or text buffer.

g_scanner_set_scope ()

guint               g_scanner_set_scope                 (GScanner *scanner,
                                                         guint scope_id);

Sets the current scope.

g_scanner_scope_add_symbol ()

void                g_scanner_scope_add_symbol          (GScanner *scanner,
                                                         guint scope_id,
                                                         const gchar *symbol,
                                                         gpointer value);

Adds a symbol to the given scope.

g_scanner_scope_foreach_symbol ()

void                g_scanner_scope_foreach_symbol      (GScanner *scanner,
                                                         guint scope_id,
                                                         GHFunc func,
                                                         gpointer user_data);

Calls the given function for each of the symbol/value pairs in the given scope of the GScanner. The function is passed the symbol and value of each pair, and the given user_data parameter.

g_scanner_scope_lookup_symbol ()

gpointer            g_scanner_scope_lookup_symbol       (GScanner *scanner,
                                                         guint scope_id,
                                                         const gchar *symbol);

Looks up a symbol in a scope and return its value. If the symbol is not bound in the scope, NULL is returned.

g_scanner_scope_remove_symbol ()

void                g_scanner_scope_remove_symbol       (GScanner *scanner,
                                                         guint scope_id,
                                                         const gchar *symbol);

Removes a symbol from a scope.

g_scanner_freeze_symbol_table()

#define             g_scanner_freeze_symbol_table(scanner)

There is no reason to use this macro, since it does nothing.

g_scanner_thaw_symbol_table()

#define             g_scanner_thaw_symbol_table(scanner)

There is no reason to use this macro, since it does nothing.

g_scanner_lookup_symbol ()

gpointer            g_scanner_lookup_symbol             (GScanner *scanner,
                                                         const gchar *symbol);

Looks up a symbol in the current scope and return its value. If the symbol is not bound in the current scope, NULL is returned.

g_scanner_warn ()

void                g_scanner_warn                      (GScanner *scanner,
                                                         const gchar *format,
                                                         ...);

Outputs a warning message, via the GScanner message handler.

g_scanner_error ()

void                g_scanner_error                     (GScanner *scanner,
                                                         const gchar *format,
                                                         ...);

Outputs an error message, via the GScanner message handler.

g_scanner_unexp_token ()

void                g_scanner_unexp_token               (GScanner *scanner,
                                                         GTokenType expected_token,
                                                         const gchar *identifier_spec,
                                                         const gchar *symbol_spec,
                                                         const gchar *symbol_name,
                                                         const gchar *message,
                                                         gint is_error);

Outputs a message through the scanner's msg_handler, resulting from an unexpected token in the input stream. Note that you should not call g_scanner_peek_next_token() followed by g_scanner_unexp_token() without an intermediate call to g_scanner_get_next_token(), as g_scanner_unexp_token() evaluates the scanner's current token (not the peeked token) to construct part of the message.

GScannerMsgFunc ()

void                (*GScannerMsgFunc)                  (GScanner *scanner,
                                                         gchar *message,
                                                         gboolean error);

Specifies the type of the message handler function.

g_scanner_destroy ()

void                g_scanner_destroy                   (GScanner *scanner);

Frees all memory used by the GScanner.

enum GTokenType

typedef enum
{
  G_TOKEN_EOF			=   0,
  
  G_TOKEN_LEFT_PAREN		= '(',
  G_TOKEN_RIGHT_PAREN		= ')',
  G_TOKEN_LEFT_CURLY		= '{',
  G_TOKEN_RIGHT_CURLY		= '}',
  G_TOKEN_LEFT_BRACE		= '[',
  G_TOKEN_RIGHT_BRACE		= ']',
  G_TOKEN_EQUAL_SIGN		= '=',
  G_TOKEN_COMMA			= ',',
  
  G_TOKEN_NONE			= 256,
  
  G_TOKEN_ERROR,
  
  G_TOKEN_CHAR,
  G_TOKEN_BINARY,
  G_TOKEN_OCTAL,
  G_TOKEN_INT,
  G_TOKEN_HEX,
  G_TOKEN_FLOAT,
  G_TOKEN_STRING,
  
  G_TOKEN_SYMBOL,
  G_TOKEN_IDENTIFIER,
  G_TOKEN_IDENTIFIER_NULL,
  
  G_TOKEN_COMMENT_SINGLE,
  G_TOKEN_COMMENT_MULTI,
  G_TOKEN_LAST
} GTokenType;

The possible types of token returned from each g_scanner_get_next_token() call.

union GTokenValue

union GTokenValue
{
  gpointer	v_symbol;
  gchar		*v_identifier;
  gulong	v_binary;
  gulong	v_octal;
  gulong	v_int;
  guint64       v_int64;
  gdouble	v_float;
  gulong	v_hex;
  gchar		*v_string;
  gchar		*v_comment;
  guchar	v_char;
  guint		v_error;
};

A union holding the value of the token.

enum GErrorType

typedef enum
{
  G_ERR_UNKNOWN,
  G_ERR_UNEXP_EOF,
  G_ERR_UNEXP_EOF_IN_STRING,
  G_ERR_UNEXP_EOF_IN_COMMENT,
  G_ERR_NON_DIGIT_IN_CONST,
  G_ERR_DIGIT_RADIX,
  G_ERR_FLOAT_RADIX,
  G_ERR_FLOAT_MALFORMED
} GErrorType;

The possible errors, used in the v_error field of GTokenValue, when the token is a G_TOKEN_ERROR.

G_CSET_a_2_z

#define G_CSET_a_2_z	"abcdefghijklmnopqrstuvwxyz"

The set of lowercase ASCII alphabet characters. Used for specifying valid identifier characters in GScannerConfig.

G_CSET_A_2_Z

#define G_CSET_A_2_Z	"ABCDEFGHIJKLMNOPQRSTUVWXYZ"

The set of uppercase ASCII alphabet characters. Used for specifying valid identifier characters in GScannerConfig.

G_CSET_DIGITS

#define G_CSET_DIGITS	"0123456789"

The set of digits. Used for specifying valid identifier characters in GScannerConfig.

G_CSET_LATINC

#define             G_CSET_LATINC

The set of uppercase ISO 8859-1 alphabet characters which are not ASCII characters. Used for specifying valid identifier characters in GScannerConfig.

G_CSET_LATINS

#define             G_CSET_LATINS

The set of lowercase ISO 8859-1 alphabet characters which are not ASCII characters. Used for specifying valid identifier characters in GScannerConfig.

g_scanner_add_symbol()

#define             g_scanner_add_symbol( scanner, symbol, value )

Adds a symbol to the default scope.

g_scanner_remove_symbol()

#define             g_scanner_remove_symbol( scanner, symbol )

Removes a symbol from the default scope.

g_scanner_foreach_symbol()

#define             g_scanner_foreach_symbol( scanner, func, data )

Calls a function for each symbol in the default scope.