pc_accumulation

Author:

Pedro Salvado

pc_accumulation: pc_accumulation

pc_accumulation

Homepage: http://ros.org/wiki/pc_accumulation

pc_accumulation

Usage

How to accumulate a pointCloud

This is what you should do

use pc_accumulation_nodelet:

pc_accumulation lib;

Then you must subscribe the desired topic

With this class you can subscribe a sensor_msgs::LaserScan or sensor_msgs::PointCloud.(create respective Callback) In order for this to work, you must subscribe also a nav_msgs::Odometry, in order to make the accumulation possible.

You must set several parameters (required)

Must specify:(use them as Global Variables)

Frame of accumulation : acc_frame = Desired frame to remove points from lib._acc_frame_id = Distance distance_from =

Publish Accumulated PointCloud

The message to publish is from type sensor_msgs::PointCloud2

To make it simple:

Using the nodelet

Example of a xml launch file for xb3

<?xml version="1.0"?>
<launch>
  <!-- This is a pc_accumulation launch file for starting the pc_accumulation_nodelet-->

  <node name="pc_accumulation_nodelet" pkg="pc_accumulation" type="pc_accumulation_nodelet" >
       
              <!--This parameter set the desired max distance removed_from -->
              <param name="distance_from" value="15" type="double"/>
              
              <!--This parameter sets the point from your system -->
              <param name="removed_from" value="/atc/vehicle/center_bumper"/>

              <!-- Define the time interval between each published message-->
              <param name="timer_value" value="0.1" type="double"/> <!--Frequency of pub message ( sec ) -->

              <!-- Set the accumulation frame_id-->
              <param name="acc_frame" value="/world"/> 
              

              <!-- Subscribe several topics LaserScan and PointClouds (0 - 4)-->
              <!-- Remmaping topics-->
              <remap from="/laserscan0" to="/atc/laser/center_top_roof/laser_scan"/> 

             <remap from="/pointcloud0" to="/xb3_short/left/image_raw"/>
 </node>
</launch>